ZH-DB-20KN 2 Ton Universal Material Testing Machine

Universal strength Testing Machine is widely used in wires & cables, hardware, metal, rubber, footwear, leather, apparel, fabric, tape paper products, pharmacy and so on, for tensile strength, tear resistance, peel strength, bend strength, shear force, ect with different fixtures customized according to national and international standards and customer required.
The machine is a kind of electric tensile tester which adopts the motor to drive ball screw to move fixture. Place the fixture with sample between the upper and lower fixture, use a given speed to pull sample upward by upper fixture. Load cell above upper fixture will sense tensile strength, and convert the strength into voltage sign and output to the display screen. And the strength value will be displayed automatically on micro computer or host computer.
 
Application:
Testing  Equipment is used to test strength tension, compression, shearing force, adhesion, peeling force, tear strength and other force of specimen, semiproduct and finished product in the field of rubber, plastic, metal, nylon, fabric, paper, aviation, packing, architecture, petrochemistry, electric appliance, automobile,...etc. , which are the basic facilities for input quality control (I.Q.C), Quality Control (Q.C.), Physical Inspection, Mechanics Research and Material Development.
 
Features:
1. a variety of measurement units, Measure In Imperial & Metric are switchable;
2. the software interface with three languages in Simplified Chinese, Traditional Chinese and English, which can be switched easily
3. The pattern of Test reports can be self -designated; test data can be displayed directly in the main screen;
4. User-defined Test methods; with experimental data analysis function;
5. a single-screen operation; do not need to switch the screen.
6. comparative mode at the same time to make a number of curve data comparison;
7. High quality, accurate and reliable models with competitive price.
8. Motor system: Panasonic servo motor +Panasonic servo driver +ball screw (Taiwan) +Leeming reduction gears +synchronous belt driver;
9. Computer servo system :Desktop computer servo control tensile tester dedicated
10. Windows interface to test software it can achieve to set speed, load, power time, Breakpoint proportion, more order control mode and meet different test requirement.
11. Displacement resolution: 0.001mm
12. Safety device: overload emergency stop device, fluctuation travel limit device, leakage automatic broken electricity system, automatic breakpoint stop function.
 
Technical parameters:

Maximum test force: 2000kg (customer optional)

Resolution: 1/200000

Force unit: KG, N, LB

Test stroke: 0~600mm (fixture is customized according to user's product)

Displacement resolution: 0.01mm

Test speed range: 0.02~500mm/min, up and down and test speed can be set

Stop mode: automatic stop when broken

Control mode: external computer control (user provide computer)

Power system: servo motor + reduction ratio (increased torque)

Transmission mode: ball screw transmission (TBI Taiwan)

Polished national standard (hardened)

Host size: about 740 x 510 x 1980mm appr.;

Display mode: computer display (Eng/CN language display)

Effective pillar spacing:

a. unlimited front and rear test space, 0～600mm

b. Left and right test space: 400mm

Automatic shutdown device:

a. Upper and lower limit stroke protection device,

b. Maximum capacity overload protection Leakage protection.,

Test items: real-time value, maximum value, breaking value, elongation, breaking point ratio, test date

Print items: maximum value, breaking value, breaking point ratio, test date