Battery explosion-proof chamber

Battery Explosion-Proof Test Chamber

ZH-EP-50

1. Introduction.

The battery explosion-proof test chamber is mainly used for protection of operators and instruments during overcharging and discharging tests of batteries when batteries are placed in the explosion-proof box and connected to an external charging and discharging tester; The inner volume can be customized according to testing needs.

2. Conforms to the standard.

GB/T 31241-2014, GB/T 18287-2013, GB/T 8897.6-2008, YD/T 2366.1-2011, GB/T 21966-2008, MT/T 1051-2007;

3. Specification.

3.1. Inner size: 500 * 500 * 500mm (length * width * height), can be customized

3.2. External size: 750 * 770 * 1080mm (length * width * height) appr.

3.3. Control panel: Controller is located on the upper part of the machine

3.4. Door opening: open the single door from right to the left;\

3.5. Viewing window: The door is equipped with a visible window, with a specification of W200 * 250mm. The glass is equipped with a protective net for easy protection;

3.6. Inner material: 430 # mirror panel, thickness 1.0mm;

3.7. External material: Cold rolled sheet with paint treatment, thickness 1.0mm

3.8. Insulation insulation layer: The inner box is empty, with an insulation board at the bottom. The test box is internally coated with Teflon tape, which effectively insulates and flame retards, making it easy to clean;

3.9. Test hole: One lead test hole with a diameter of 50mm is opened on the right side of the single-box machine;

3.10. Door lock: The door is connected to the box by a strong hinge, and the explosion-proof cold pull handle door lock;

3.11. Casters: Install brake movable casters at the bottom of the machine, which can move freely

3.12. Lighting function: with lighting lamp inside chamber

3.13. Smoke exhaust function: During battery testing, the smoke and exhaust gas from the explosion can be discharged outdoors through an exhaust fan, and connected to the outdoor through a φ90mm pipe from the exhaust outlet at the rear of the explosion-proof box. The smoke exhaust can be manually activated;

3.14. Relief safety feature: There is a pressure relief port directly behind the inner box, which can instantly discharge shock waves in the event of an explosion. The size of the pressure relief port is 150 * 150mm, and an explosion-proof chain is installed on the door to prevent the door from falling off under impact, causing work-related injuries or other losses;

3.15. Circuit protection system: Grounding protection and fast fuse;

3.16. Power supply: AC220V 50Hz 1ph 500W

3.17. Machine weight: 120 kgs appr.

3.18. Function optional to purchase: Fire extinguishing equipment, video surveillance system, electronic door lock system;