Pneumatic drop test machine

Pneumatic Drop Test Machine

ZH-QD-315

1. Overview.

This machine is suitable for free drop test of mobile phones (cell phones), walkie-talkies, lithium batteries, electronic dictionaries, building intercom phones, chargers, power supplies, CD/MD/MP3 and other small consumer electronic products and parts; 

2. Features.

This machine adopts a pneumatic structure, the test piece is placed in a special fixture (adjustable stroke) to clamp firmly, press the drop button, the cylinder is released, and the test piece will undergo a free fall test. The drop height can be adjusted up and down, and a height scale is attached to know the drop height of the test piece. A variety of drop floors are available to meet different test standards.

3. Applicable standards.

JIS C 0044, IEC 60068-2-32, other standard about drop test of batteries

4. Main technical parameters:

1) Maximum weight of test piece: 2Kg

2) Effective drop height: 300~1500mm

3) Drop height indication: 1cm

4) Drop height display: LED meter digital display

5) Maximum size of the test piece: 300*400mm

6) Falling floor medium: steel plate

7) Falling method: edge, corner, face all-round fall

8) Transmission mode: electric lift, pneumatic drop

9) Floor size: 800*750*10mm

10) Use air pressure: <1Mpa

11) Machine size (approx.): 800*750*1900mm

12) Machine weight: 80kg

13) Power source: 1∮, 220V, 5A

5. Equipment features:

1) The cabinet is treated with electrostatic paint, the whole machine is designed reasonably, and the operation is safe, stable, accurate, and beautiful;

2) The product is clamped pneumatically, and the front end of the clamp is equipped with silicone rubber to prevent the product from being deformed;

3) The test height is electric lifting mode, and the high-precision instrument indicates the test height;

4) Equipped with a protective box to prevent the product from rushing out after falling.